The set of conditions listed below should be considered as minimum requirements.
It is always preferable to shut off the general power. Installation defects may result in
unwanted feedback. Danger of electric shock.
In addition to the safety measures indicated in this manual, the general measures
that apply in this area (specific to the installation, country, etc) must be taken into
account.
The electrical installation must not involve a risk of fire or explosion. Workers must
be duly protected against accident risks from direct or indirect contact. The electrical
installation and protection devices must take the voltage, the external determining
factors and the competence of the people who have access to parts of the installation
into account.
All equipment must be appropriate to protect exposed workers against the risk of di-
rect or indirect contacts. In any case, the electrical parts of the work equipment must
comply with that laid down in the corresponding specific regulations.
All workers who carry out work outdoors will suspend their work in the case of storms,
rain or strong winds, snow or any other unfavourable environmental condition which
makes visibility or handling tools difficult. Work on installations directly connected to
overhead electricity lines must be interrupted in the case of storms.
INGETEAM accepts no liability for any damages caused by improper use of the equip-
ment. Any work carried out on any equipment which implies a modification of the
original electrical arrangements must be proposed in advance to INGETEAM. These
must be studied and approved by INGETEAM.
The necessary means must be arranged to prevent people from outside
the installation approaching or handling the equipment:
- Care, people working signs, like the one to the right.
- Elements for setting or mechanical locking, using padlocks and keys,
for automatic mechanisms of appropriate models.
These instructions must be easily accessible close to the unit and located with-
in reach of all users.
Before installation and start-up, please read these safety instructions and warnings carefully
as well as all the notices located on the unit. Ensure that all the notices are perfectly legible
and that those which are damaged or have disappeared are restored.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 21 of 64
21 of 64
of 64
