Ingersoll-Rand Schlage AMGtime G Series, Руководство пользователя

Страница: 99 / 119

91
User Education
Hand Geometry Reader Basics
The terminal is easy to use and non-threatening. However, most people have never used a biometric
terminal. Training users on how the terminal works and how to use it will eliminate most fears and
concerns before they occur. Inform the users of these facts:
• The terminal reads the shape of the hand, not the fingerprints or palm prints.
• It does not identify people. It confirms people’s identity.
• It scans with an invisible light of the type used in TV remote controls.
• It does not transfer germs any more than a doorknob or money.
• It does not invade privacy; it guarantees it.
• The enrollment process requires three or more reads to collect enough information to create a
template.
Proper Hand Placement
For correct, consistent hand reads it is very important that your hand is placed on the platen in the
same manner every time. The following rules apply for proper hand placement on the platen.
1 If you are wearing a ring, rotate the ring so the stone faces up in its normal position.
2 Slide your right hand onto the platen rather like an
airplane landing at the airport.
3 Slide your hand forward until the web between
your index and middle finger stops against the
web pin.
4 Keep your hand flat. You should feel the surface of
the platen on your palm and the underside of your
fingers.
5 Close your fingers together until they touch the
finger pins and watch the hand diagram on the
terminal display. There are small LEDs on the
hand diagram that correspond with the finger pins.
Your thumb should be held wide to the side.
6 The LEDs turn off when you have properly placed your
fingers. If an LED remains on, a finger is not in proper
contact with a finger pin.
Termin a l F a ce H a nd Pl a cement on Pl a ten
LED s