Ingersoll-Rand Schlage AMGtime G Series, Руководство пользователя

Страница: 55 / 119

47
GT-400 Terminal User’s Guide Command Menu Reference: Setup Menu
General Setup
Set Terminal Date
Set Terminal Date is used to set the date on a
demo terminal. If the terminal is in a networked
mode, the terminal will get the date from the host
server. Using the keypad, enter the date
according to the following format: mm dd yyyy. Default: none
Ran g e: none
Dependencie s : none
Who: A site administrator should set the
date of a demo terminal during initial
setup.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press General Setup.
4 Press Set Terminal Date.
5 Enter the current date.
6 Press Enter.
CmdLine Setup
CmdLine Setup enables or disables command
line interface (CLI) access to the terminal. The
display of this menu will indicate the current state
of the CmdLine Setup option. If it is disabled,
press Enable to enable CLI access. If it is
enabled, press Disable to disable it. This option
should normally be disabled for security reasons.
Default: Disabled
Ran g e: none
Dependencie s : none
Who: A site administrator, application
developer/tester or any individual
under the guidance of a technical
support representative can disable or
enable CLI access as a
troubleshooting, testing or debugging
step.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press General Setup.
4 Press CmdLine Setup.
5 Press Enable/Disable.