Ingersoll-Rand Schlage AMGtime G Series, Руководство пользователя

Страница: 42 / 119

Basic Operations: Creating and Enrolling Users
34
GT-400 Terminal User’s Guide
Creating and Enrolling Users
Creating an ID Numbering System
An ID numbering system should be created before entering the first user into the terminal. ID Numbers
(RPINs) are used during user enrollment and verification. Use the following guidelines when designing
an ID numbering system.
• Each user must have a unique ID number (RPIN).
• All RPINs should be the same length.
By making all RPINs the same length, the Set ID Length feature can be used. See “Set ID
Length” on page 49 for more information.
• The RPIN should be as short as possible so users can remember their ID number. To make
sure you'll have enough unique RPINs, determine the length of RPIN by determining the
number of Users needed.
For example, if you have 10,000 or less users, use a four-digit RPIN. If you have more than
10,000 users, use a five-digit RPIN.
Enroll a User
See “Enroll User” on page 78 for more information.
1 Ensure the user has been created in the terminal.
See “Add User” on page 86 for more information.
2 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
3 Press User Management.
4 Press Edit User.
5 Press List Users.
6 Scroll to the name of the user you wish to enroll using . Press the middle navigational key to
select the user.
7 Press Enroll User.
8 Follow the prompts on the terminal screen for hand placement.
A user may also be enrolled without using a hand for verification. See “No Hand Enroll” on page 81
for more information.