background image

EN

EN-52  

 

80446339 Rev E

WEB ACCESS

DASHBOARD ICONS

“Dashboard Icons” are intended to be a quick at-a-glance view of system status.  These icons are always visible regardless of the 
folder/page selected.

The following table lists standard dashboard icons and their definition. Note that the color of these icons changes based on the 
state set by the application while running.

Icons

Name

Description

Alert

Illuminates when a Warning (flashes) or Trip (constant on) is sensed.

Remote Control

Remote control is enabled.

Service Required

A Service reminder is nearing or has expired (i.e. an air or oil filter needs to be 
changed)

Unloaded

Compressor is in the unloaded state

Loaded

Compressor is in the loaded state

Compressor Name, User Name, Print Button and Log Out button are always visible on the right side top of the page, regardless 
of the tab selected.

Compressor Name

The user can set the “Compressor Name” from the “Compressor 
Information” tab. The user can use this host name as a browser 
address for the web pages. A “Compressor Name” is a domain 
address to log in the CONTROLLER web pages.

Logged in User

Currently logged in user is shown on the right side top in each 
web page.

Print Button

Click on “Print” button, to print the content on existing web 
page

Log Out Button

Click on “Logout” button to terminate the current session. 
Clicking this button will log out the current user and return to 
the web page login screen.

RELEASED 01/Nov/2018 12:06:37 GMT

Содержание R37-160









































































Отзывы: