80446339 Rev E
EN-39
EN
•
PAGES 9-11: COMPRESSOR DATA
Figure 65 : Compressor Data
The following are displayed in this section:
• % Energy Savings
• % Capacity
• Package Power
• Power On Hours and Minutes
• Running Hours and Minutes
• Motor Speed
• Time
• Motor Current
• Motor Voltage
• AC Input Voltage
• DC Bus Voltage
• IGBT U Temperature
• IGBT V Temperature
• IGBT W Temperature
• Input Rectifier Temperature
• VSD Ambient Temperature
• Target Pressure
FACTORY SETTINGS FOLDER
This folder is for
Ingersoll Rand
factory and service personnel. A password
must be entered on page one in order to adjust values in this folder. This
folder is used for setting parameters that are specific to that compressor and
displaying software information for the controller.
•
PAGE 1 : PASSWORD
Figure 66 : Password
Table 22 : Password
Password:
Provides access to enter a valid password to gain access to
password protected parameters. The password is entered
by scrolling down to the password value and pressing the
return key.
Password
Entered:
This checkbox will indicate a valid password has been
entered. If this checkbox is blank, a valid password has not
been entered or it has timed out. This is read only.
Password
Timeout
Enable:
Checking this box will enable the password time feature.
Timeout
Delay:
This timeout along with the password timeout enable allows
the user to set an adjustable amount of time to require
a valid password to be re-entered. Once this timeout is
reached re-entry of a valid password is required.
•
PAGES 2-4 : FACTORY SETTINGS
Figure 67 : Factory Settings
