background image

EN

80446339 Rev E 

EN-49

WEB ACCESS

The login screen requires the user to enter their username, password and select the language for the web pages. This login 
screen will authenticate the user against the type of account. After log in the user can view/modify the data as per the available 
access to the user account.

Enter the username & password for log into system and access the web pages. 

Type in your user name (case sensitive)

Type in your password (case sensitive)

If the user name or password are incorrect the login page will show a message “Unknown combination of username and 
password”.

Click on the dropdown control and select the “Language” from language dropdown control. The full list of languages for the 
X

e

-145M controller is supported by the web interface. The user may select one language from this list. This selection will be the 

language for the web interface after the login is successful.

Select your language from the dropdown list

Click on “Login” button to continue. Upon successfully logging in you will see the system HOME screen.

Only 5 users can concurrently login to the controller at a time. If another user attempts to login, an error message will 
be displayed. “The limit on the number of concurrent users has been reached. Please wait for a user to logoff before 
trying again.”

Please see below section for default account information, and section “ACCOUNT MANAGEMENT” for more detailed information 
about the account management process.

Содержание R37-160









































































Отзывы: