Ingersoll-Rand HP1300WCU, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 63 / 75

63
( )
Book 54757919 (5/02)
ALERT/SHUTDOWN CONDITIONS
Software V1.22
ALERT SHUTDOWN
CODE
LIGHT
(BLINKS)
CODE LIGHT
(STEADY)
DELAY
(sec)
Low Engine Speed < 1000 RPM 1 CPRSR Malf. 10
High Engine Speed >1900 RPM 2 CPRSR Malf. 30
Engine Crank Time Exceeded 3 CPRSR Malf. 0
Engine Oil Temperature > 252 deg. F 5 CPRSR Malf.
Intake Manifold Temperature > 180 deg. F 6 CPRSR Malf.
Low AE Oil Pressure (HP1600 only) 31 CPRSR Malf. 3
Disch. Temp (RT2) Sensor Fault 32 CPRSR Malf. 10
Separator Tank (PT1) Sensor Fault 33 CPRSR Malf.
Separator Tank Pressure >20 PSI during
start attempt (Engine will not crank) 34 CPRSR Malf. 0
Machine Over Pressure 35 CPRSR Malf. 1
Safety Valve Open 36 CPRSR Malf. 0
Sep. Tank Temp > 247 degrees F 50 CPRSR Malf. 3
Machine ID Not Valid 51 CPRSR Malf. 0
Sep. Tank Temp. (Rt1) Sensor Fault 53 CPRSR Malf. 10
Reg. System Pressure (PT2)
Sensor Fault 54 CPRSR Malf.
Serial Comm. Problem 70 CPRSR Malf.
CAN Bus Problem 71 CPRSR Malf.
Dedicated Lights:
Low Fuel Level Fuel Level Fuel Level 3
Air Filter Restriction Soiled Filter
Low Battery Voltage Battery
Charging
Condition
Engine Oil Pressure < 18 PSI Low Engine
Oil Pressure
Engine Coolant Temperature
> = 215 deg F.
High Engine
Temp
Engine Coolant Temperature
> = 220 deg F.
High Engine Temp 10
IQ Filter Restriction IQ Filter Restriction 3
High Discharge Temp. (RT2 > 247 deg. F) High Comp. Temp. 3
CAN Derived Data =