Infinova V3070-8 Series, Руководство пользователя

Страница: 67 / 90

59
Figure 7-34 NAS Setup
Please refer to the following sheet for detailed information.
Parameter Function
NAS enable
Please select network storage protocol
and then enable NAS function. The
network storage protocol includes FTP.
Server IP Input remote storage server IP address.
Port
Input Remote storage server port
number.
User Name Log in user account.
File length
The max files length when you transfer
the file. When the input value is 0, then
system upload the whole files.
Password
The password you need to login the
server.
Remote Path Remote storage file path.
Period info
Channel Select a monitor channel .
Setup
In NAS interface, click set button, you
can go to the corresponding setup
interface. See Figure 7-34.
.Please set schedule period and then
select corresponding record type:
schedule/alarm. Please note device does
not support motion detect record
function now.
Please select date (Current setup applies
to current day by default. You can draw
a circle before the week to apply the
setup to the whole week.)
After complete setup, please go back to
Figure 7-28 and then click save to save
current time period setup.
Copy
User can use this shortcut to copy the
storage state of a channel to another (or
all other channels)
NTP
The NTP interface is shown as in Figure 7-35.
Here you can realize network time synchronization. Please enable
current function and then input server IP, port number, time zone
and time.
Figure 7-35 NTP
Please refer to the following sheet for detailed information.
Parameter Function
Enable Enable NTP function or not.
Server IP Server IP address
Port Server port. System supports TCP only and
default port value is 123.
Time Zone Device current time zone.
Update
Interval
Time update interval value.
Alarm Centre
Alarm centre interface is shown as below. See Figure 7-36.
Please input alarm centre server IP, port number. Once there is an
alarm occurred, system can notify the alarm centre as you specified
here.