Infinova V3070-8 Series Скачать руководство пользователя

Страница: 48 / 90

in Figure 5-77.

You can set HDDs for main stream, extra stream and snap pictures

respectively. The main stream and extra stream of one channel can

be saved to different groups.

Channel: It is to display the actual channel number of current NVR.

HDD Group: It is the SN of the HDD group management. For

example, if you set two HDD groups such as Group 1 and Group 2,

you can see there are two options (1/2) of the HDD group

dropdown list.

Important

Please make sure you have set HDD group for each channel,

otherwise you can not save current setup!

Once you change the HDD Group settings, system will pack

the records and then reboot!

Tips

There is an easy way for you to test whether the records from the

corresponding channel is saved in the specified HDD. You can

remove the HDD and then check the channel can record or not. You

can see the channel does not record and you can not search the

previous record now.

Figure 5-77

5.7.2 Abnormality

Abnormality interface is shown as in Figure 5-78.

Event type: There are several options for you such as disk

error, no disk, disconnection, IP conflict and etc.

Alarm output: Please select alarm activation output port

(multiple choices).

Latch: Here you can set corresponding delaying time. The

value ranges from 10s-300s. System automatically delays

specified seconds in turning off alarm and activated output

after external alarm cancelled.

Show message: system can pop up the message in the local

screen to alert you when an alarm occurs.

Alarm upload: System can upload the alarm signal to the

network (including alarm centre) if you enabled current

function.

Send email: System can send out email to alert you when

an alarm occurs.

Buzzer: Highlight the icon to enable this function. The buzzer

beeps when an alarm occurs.

Figure 5-78

5.7.3 Alarm Output

Here is for you to set proper alarm output.

Please highlight icon

to select the corresponding alarm

output.

After all the setups please click OK button, system goes back to

the previous menu. See Figure 5-79.

Figure 5-79

5.7.4 Manual Record

Note:

You need to have proper rights to implement the

following operations. Please make sure the HDD has been

properly installed.

5.7.4.1 Manual record menu

Right click mouse or in the main menu, Advanced->Manual

Содержание V3070-8 Series



























































































Результаты поиска

Содержание V3070-8 Series

Отзывы:

Похожие инструкции для V3070-8 Series

Бренды по названию

Популярные бренды

Infinova V3070-8 Series, Руководство пользователя

Результаты поиска

Содержание V3070-8 Series

Отзывы:

Похожие инструкции для V3070-8 Series

Бренды по названию

Популярные бренды