Infinova V3070-8 Series, Руководство пользователя

Страница: 43 / 90

35
Please highlight icon to select the corresponding function.
After all the setups please click save button, system goes back to
the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set
channel setup since the video in each channel may not be the
same.
In Figure 5-61, you can left click mouse and then drag it to set a
region for motion detection. Click Fn to switch between
arm/withdraw motion detection. After setting, click enter button
to exit.
Figure 5-60
Figure 5-61
Figure 5-62
Figure 5-63
Figure 5-64
5.6.7.2 Video Loss
In Figure 5-60, select video loss from the type list. You can see
the interface is shown as in Figure 5-65. This function allows
you to be informed when video loss phenomenon occurred. You
can enable alarm output channel and then enable show message
function.
You can refer to Section 5.6.7.1 Motion Detect for detailed
information.
Tips:
You can enable preset/tour/pattern activation operation when
video loss occurs.