Infinova V3070-8 Series Скачать руководство пользователя

Страница: 4 / 90

Read this manual carefully before installation. This manual should be saved for future use.

Important Safety Instructions and Warnings

Electronic devices must be kept away from water, fire or high magnetic radiation.

Clean with a dry cloth.

Provide adequate ventilation.

Unplug the power supply when the device is not to be used for an extended period of time.

Only use components and parts recommended by manufacturer.

Position power source and related wires to assure they will be kept away from ground and access way.

Refer all service matters to qualified personnel.

Save product packaging to ensure availability of proper shipping containers for future transportation.

Indicates that the un-insulated components within the product may carry a voltage harmful to humans.

Indicates operations that should be conducted in strict compliance with instructions and guidelines contained in this manual.

Warning: To avoid risk of fire and electric shock, keep the product away from rain and moisture!

Содержание V3070-8 Series



























































































Результаты поиска

Содержание V3070-8 Series

Отзывы:

Похожие инструкции для V3070-8 Series

Бренды по названию

Популярные бренды

Infinova V3070-8 Series, Руководство пользователя

Результаты поиска

Содержание V3070-8 Series

Отзывы:

Похожие инструкции для V3070-8 Series

Бренды по названию

Популярные бренды