Infinova V3070-8 Series, Руководство пользователя

Страница: 12 / 90

4
Jog
(inner dial)
z
Up/down direction key.
z
Playback mode, turn the inner
dial to realized frame by frame
playback. (Only applies to some
special versions.)
USB2.0 port
To connect USB2.0 storage device,
USB2.0 mouse, burner and etc.
Record light
1-16
For 4/8/16 channel device: indicator
on means that the channel is in
recording.
Remote
control
indicator
ACT Remote control indicator.
Status
indicator
Status
If there is Fn indicator, current status
indicator is null.
Remote
Control IR
Indicator
IR
When control the device by
tele-controller, the indicator will
flicker.
Power
indicator
PWR
Power indicator
2.2 Rear Panel
The 58 series rear panel is shown as below. See Figure 2-2 below.
Figure 2-2
Please refer to the following sheet for detailed information.
Port Name Connection Function
Power
button
/ /
Power on/off
button.
Power input
port
/ /
Input AC 220V
power.
MIC IN
Audio input
port
/
Bidirectional talk
input port. It is to
receive the analog
audio signal output
from the devices
such as mike phone,
pickup.
MIC OUT
Audio
output port
/
Audio output port.
It is to output the
analog audio signal
to the devices such
as the sound box.
Port Name Connection Function
1-16
Alarm input
port 1-16.
I/O port
z
There are four
groups. The first
group is from port 1
to port 4, the second
group is from port 5
to port 8, the third
group is from 9 to
12, and the fourth
group is from 13 to
16. They are to
receive the signal
from the external
alarm source. There
are two types; NO
(normal open)/NC
(normal close).
z
When your
alarm input device
is using external
power, please make
sure the device and
the NVR have the
same ground.
Ground end
Alarm input ground
end.
NO1 to
NO5
5-ch alarm
output port
z 5 groups of
alarm output ports.
(Group 1: port
NO1~C1, Group 2:
port NO2~C2,
Group 3: port
NO3~C3, Group 4:
port NO4~C4,
Group 5: port NO5,
C5, NC5). Output
alarm signal to the
alarm device. Please
make sure there is
power to the
external alarm
device.
z NO: Normal
open alarm output
port.
z C: Alarm output
public end.
z NC: Normal
close alarm output
port.
C1 to C5
NC5