Inficon Pernicka 700H CHLD, Перевод оригинальной инструкции по эксплуатации

Страница: 70 / 100

6 | Operation INFICON
70 / 100 Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)
6.6 Measurement data
The measurement data are recorded in a list.
Fig. 43: Window "Leak Table"
Button Description
Clear Table ► To delete all measurement data in the table, press this
button.
Export Table ► To open all measurement data in the preinstalled Open
Office press this button. In the Open Office you can store
the measurement results at any location, e.g. a USB
flash drive (FAT32 formatted). In the "Locals" window,
the "log.xls" is stored, in which contains all measurement
results (regardless of the export).
6.7 Determine mass spectrometer
In the "Scan" mode, you can use the CHLD-Sensor to measure all the masses present
in the system of the device and display them as a mass spectrum in the "Measure"
window. With this measurement you can determine which gases are in the system of
the device.
1
Measure > Scan > Load & Run.