Inficon HLD6000 Скачать руководство пользователя страница 10

Страница: 10 / 90

2 | Safety

INFICON

10 / 90

HLD6000-Operating-instructions-kinb43en1-05-(2107)

Hazards due to liquids

and chemicals

Liquids and chemical substances can damage the instrument.

• Adhere to the restrictions of use.

• Do not suck up liquids with the instrument.

• Never try to find toxic, caustic, microbiological, explosive, radioactive or other

harmful substances with the device.

• Only use the device away from areas with a risk of explosions.

• Do not expose the device to a naked flame and avoid spark formation, for

example, by smoking.

Danger to wearers of

pacemakers or

implants

The device contains magnets. Pacemakers and other implants can be influenced in

their function.

• Keep a distance of at least 10 cm between the device and the implant.

Dangers from electric

power

There is a danger to life from the contact of conductive parts inside the device.

• Disconnect the device from the power supply prior to any installation and

maintenance work. Make sure that the electric power supply cannot reconnected

without authorization.

Contact of the sniffer tip with live parts may result in danger to life.

• Before starting the leak test, disconnect electrically operated test objects from the

power supply. Ensure that the electrical supply cannot be switched back on

unintentionally.

The device contains electric components that can be damaged from high electric

voltage.

• Before connecting to the power supply, make sure that the mains voltage on site is

within the permitted operating voltage range.

The permitted operating voltage range is indicated on the device.

Dangers from strong

exposure to light

Exposure of the eyes to LED light can lead to lasting eye damage.

• Do not look into the LEDs of the sniffer handle from a short distance or for longer

periods of time.

Содержание HLD6000



























































































Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды

Inficon HLD6000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды