Inficon HLD6000 Скачать руководство пользователя страница 78

Страница: 78 / 90

9 | Decommissioning

INFICON

78 / 90

HLD6000-Operating-instructions-kinb43en1-05-(2107)

9 Decommissioning

9.1 Disposing of the device

The operator can dispose of the device or it can be sent to INFICON.

The device consists of materials that can be recycled. This option should be exercised

to prevent waste and also to protect the environment.

During disposal, observe the environmental and safety regulations of your country.

9.2 Sending in the device

WARNING

Danger due to harmful substances

Contaminated devices could endanger the health. The contamination declaration

serves to protect all persons who come into contact with the device.

► Fill in the declaration of contamination completely.

Please do not hesitate to contact the manufacturer and send a completed

declaration of contamination before sending anything to us.

You will then receive a return number.

Use the original packaging when returning.

Before sending the device, attach a copy of the completed contamination

declaration. See below.

Содержание HLD6000



























































































Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды

Inficon HLD6000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды