Inficon HLD6000 Скачать руководство пользователя страница 60

Страница: 60 / 90

6 | Operation

INFICON

60 / 90

HLD6000-Operating-instructions-kinb43en1-05-(2107)

Inactive buttons can be recognized as they are in gray.

NOTICE

Data loss due to an aborted connection

► Do not switch off the device and do not remove the USB flash drive while the

software is being updated!

► Switch the device off and back on after a software update has taken place.

6.11.1 Updating the software of the basic unit

The software is included in the file named ”Flash_HLD6000_Main_Vxx.xx.xxx.bin”.

Copy the file into the main directory of a USB flash drive.

Connect the USB flash drive to the USB port on the device.

> Update > Basic Unit

The display shows information on the current and the new software as well as

on the current boot loader.

Check the version information.

Select the "Start" button to start the update.

Do not switch off the device and do not remove the USB flash drive while the

software is being updated!

Follow the instructions on the touchscreen and wait until the update is complete.

If the system displays warning 104 or 106, close it with

6.11.2 Updating the software of the operating unit

The software is included in 2 files named HLD6000CU_IFC_Vx.xx.xx.exe and

HLD6000CU_IFC_Vx.xx.xx.button.

Copy the files into the main directory of a USB stick.

Connect the USB flash drive to the USB port on the device.

> Update > Operating Unit

The display shows information on the current and the new software version.

Check the version information.

Select the "Start" button to start the update.

Do not switch off the device and do not remove the USB flash drive while the

software is being updated!

Follow the instructions on the touchscreen and wait until the update is complete.

Содержание HLD6000



























































































Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды

Inficon HLD6000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание HLD6000

Отзывы:

Похожие инструкции для HLD6000

Бренды по названию

Популярные бренды