Industrex M43ic, Инструкция по эксплуатации

Страница: 30 / 51

Industrex M43ic / M43icN
page 24 01/2013 TK
5.5 MANUAL REPLENISHMENT CYCLE
You may need to run the replenishment manually, for instance during cleaning. To do this:
Press
5
With
6
,
move the cursor under Rep and select it with
7
.
You will see:
To replenish tank 1
With
6
,
move the cursor under Rep1 and press
7
.
This will add 100ml . The OFF indication will change to ON , meaning that the
replenishment pump is working. If you need more replenishment,
press
7
again to add more replenishment in steps of 100ml. There is no need
to wait for the replenishment pump to finish.
For tank 2, move the cursor under Rep2 and repeat the procedure.
Note:Upto2000mlofmanualreplenishmentoramaximumof25minpump
workingtimeisallowed(whicheverisgreater).
Press
4
to jump back to main page
.
SB dryer drop The dryer temp. is 20°C lower than the programed value.
20
SB replenishment The filmprocessor will activat a 200ml replenishment cycle
200 ml each 2 h each 2 hours.(Anti-oxidation-cycle)
SB self-cleaning The filmprocessor will activat 2,5 roller turns
(1 roller turn
≅
8 cm)
20cm each 10min each10 min.(Anti-crystallization-cycle)
Save Cancel
Press
3 3
,
use
6
to move the courser to "Options" and press
7
, use again
7
to confirm
"Standby", by using
8
you can scroll through the pages:
Rep1 0 ml OFF
Rep2 0 ml OFF