Ikegami MCP-300, Руководство по эксплуатации

Страница: 56 / 86

5. Camera Select
42
࣭
A Assignment setting
Move the cursor to the place you want to assign and confirm. The assign setting is
performed. Competing settings cannot be set on both the OCP side and CCU side.
If there is an existing setting, that setting is automatically canceled. If the
assignment setting is already confirmed, the assignment will be canceled.
࣭
Reset
Resets all assignment settings. Move the cursor to "RES" and confirm. The
settings are reset to OCP1=CCU1, OCP2=CCU2, ...OCP15=CCU15,
OCP16=CCU16.
࣭
Scene file
Registers the assignment settings of the PAU as a scene file. The assign settings
previously registered in the scene file can be loaded by simple operation. Press the
number of the Scene File to save/load the scene file in the same way as the
operation the files for the camera.
࣭
Save to/load from a memory card
Eight assignment scene files can be saved in a memory card as one file with the
MCP. Save the file to a memory card or load it from a memory card in the same
way as the operation for the camera.
Reference:
Please refer to "0. Procedure for Using a Memory Card" for more details
on the memory card operation.
UP & DOWN (Next knob)
LEFT & RIGHT (Select knob)
Blinking cursor