Ikegami MCP-300, Руководство по эксплуатации

Страница: 58 / 86

6. Procedure for Using a Memory Card
44
6.2. Inserting and Removing a Memory Card
When using a memory card, lift up the left side of the slot cover and turn it clockwise.
Slowly insert the memory card into the slot in the right direction (terminal side on the
back and notch on the left bottom) until you hear a click sound.
When removing the memory card from the card slot, lightly push the top of the card until
you hear a click sound. The buzzer sounds when the removal is detected. After the card
pushs up, slowly remove the card. Place the slot cover after use to prevent dust and other
foreign matter from entering the slot.
Note :
When the access indicator at the side of memory card slot is flashing and the
data is saved to or loaded from the memory card, make sure you do not remove
the memory card from the slot. The internal data or card itself may be damaged.
Memo:
Note that, if the BUZZER is set to “OFF”, the buzzer will not sound even when
removal is detected.
6.3. File Name Creation
Creates a file name (up to 8 characters for name and 3 characters for extension)
The following alphanumeric characters and special characters can be entered.
Letters: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Numbers: 0123456789
Symbols: #%&~-_’@$!()^{}
The file name is automatically set if nothing is set in the file name. The file name is set
according to the following rule.
NONAME
㸨㸨
("
㸨㸨
" is substituted with the program number of the camera to be connected)
6.4. Data Saving
(1) Insert an SD card into the card slot.
(2) Press the FILE switch to display the screen.
(3) Select the file type you want to save.
(4) Turn the [SAVE] switch on.
(5) Use the RE knobs to enter a file name.
(6) Press the [Execute] switch.
(7) The [Execute] switch lights up, and then the file data saving process is
executed, and “Saving…” is displayed. When the process is completed, the
buzzer sounds, and the window closes.
Memo:
If a file with the same name already exists, the warning message, “FILE
ALREADY EXIST”, is displayed. Press [Yes] to overwrite the file data. Press
[No] to cancel the saving process.
Note :
When saving important data, make sure to check the clock on the information
screen. It will be the time stamp for the file on the SD card.