Ikegami MCP-300, Руководство по эксплуатации

Страница: 52 / 86

4. Camera Data Control
38
4. Camera Data Control
Save the values adjusted by the MCP (manual set). Also reset to the saved values
(manual clear).
4.1. Manual Set and Clear
The procedures for manual set and manual clear are shown below.
(1) Press the numerical values you want to apply manual set or clear on the User
screen or Camera Control screen.
(2) The color of the numerical values changes to red, and the Manual Set/Clear
setting screen will be displayed.
(3) If you want to apply additional Manual Set/Clear, press the numerical values.
The color changes to red when selected.
(4) After selecting the items, press and hold the [Manual Set] or [Manual Clear]
switch to set.
(5) Press the [Cancel] switch or all of the red numerical values again to cancel the
setting screen.
Note :
If the function is off, the Manual Set/Clear may not be performed.
Also, when the scene file is on, the Manual Set cannot be performed.
4.2.1 Offset Display
When the [Offset] switch on the right side of the numerical value display section of the
User screen or Camera Control screen is turned on, the display of control data shows the
deviation from the setting value registered in Manual Set (or value automatically
adjusted by Auto Setup). Offset numerical values are displayed in blue color.
When this mode is on, you can check how much it is adjusted from the setting value
registered in Manual Set in one glance. If the display is
͆
0
͇
, this means that the value
is same as the registered setting.
4.2.2 RE Range
The range (per revolution) of the rotary encoder control is displayed on the LCD screen
as standard (STD) or a reduced range indicated by a fraction.
4.3 All Manual Set/Clear
Performs manual set and manual clear for all operation items of the camera. The
procedures are shown below.
Display the Standard screen, and select the [Set] or [Clear] switch of All Manual
Set/Clear. Then, press the [Execute] switch
Press the [Yes] switch to run when the confirmation window is displayed.
Note :
This operation can perform the bulk manual set and manual clear even if the
function is off. The manual set and manual clear may not be applied on some
items depending on the specifications of the camera head and BS/CCU.