Ikegami MCP-300, Руководство по эксплуатации

Страница: 51 / 86

3. LCD menu
37
Reference:
The assigned functions are shown as part of the Camera Control screen.
Please refer to functions described in "3.6.1.Camera Control" for more
details on the adjustment items.
„
Screen registration procedures
(1) Press the switches you want to register from the 12 switches on the screen
(2) The switches light up, and then the list of the selected switches is displayed at
the bottom
(3) Operate the RE knob under the Group Select to change the function group
(4) Press the function switch you want to assign to set.
Memo:
If no function is assigned to the switch, "Empty" will be displayed. If you want
to cancel the function assigned to the registered switch, select "Empty" under
the "Default" group.
3.8.5. Preset Files
Loads the MCP data from the LCD screen.
In this screen, the following operation can be performed.
࣭
Factory data
Resets the RAM status of MCP to the factory setting.
࣭
User data
Resets the RAM status of MCP to the status saved by the user.
Also saves the current RAM status.
࣭
RAM Clear
Resets the RAM status to the initial value.
࣭
Logo Data Clear
Resets the logo image to the initial setting (Ikegami logo).
Changing the logo image is optional.
3.8.6. Camsel Setting
Sets the enable/disable of the Camera Select from the LCD screen. If all switches in the same
group are disabled, that group will not be displayed.
Memo:
If all switches in the group currently displayed are set to disable and the group
is switched, the group will not be displayed from the next time.
Note :
While this screen is displayed, the status of Camera Select becomes "Not
Selected".