Ikegami MCP-300, Руководство по эксплуатации

Страница: 61 / 86

7. Multi-function
47
7. Multi-function
With the MCP-300, you can control multiple cameras and display their information.
7.1. Multi-mode Operation
The operating procedures for multi-control are shown below.
(1)
Select a camera to be used as a master by a Camera Select switch
(2) Select the MULTI switch.
(3) Use the Camera Select switches to select cameras to be slaves
(4) Operate in multi-mode
(5) Turn off the MULTI switch to cancel all slave cameras
Memo:
The operation of the Camera Select switch while the MULTI switch is
illuminated is based on the selection of slave cameras.
If you want to select a master camera or set to "Not Selected", press the Camera
Select switch after turning off the MULTI switch.
Note :
In ICCP communication, only Auto Setup can be operated in multi-mode.
Therefore, other functions cannot be operated simultaneously even if the
MULTI switch is illuminated.
Note :
Only cameras in the same group can be selected as slaves.
7.2 Multi Auto Setup
Auto setup can be simultaneously performed on multiple cameras from the MCP-300.
(Multi auto setup)
The power of each camera must be turned on before performing the multi auto setup.
Reference:
Please refer to "3.6.3. Auto Setup" for the procedures for auto setup.
Memo:
This function is active in all communication configurations.
7.3. Camera Information Display
The MCP-300 can simultaneously display the ON/OFF status, etc. of all cameras in the
same group.
Reference:
Please refer to "3.2.1 Camera Status” for more details.
7.4. Multi-control
A lock icon is displayed on the switches on the screen that cannot be control by multi-
control. When the switch is pressed, a guard sound is released. If you display and
operate those screens with no lock icons, the controlled items are sent to multiple
cameras.
The following screens can be operated.
࣭
Standard (All Manual Clear only)
࣭
Camera Control (Except items related to system)
࣭
ON/OFF Control
࣭
Auto Setup (Except REF)
࣭
Format