Ikegami MCP-300, Руководство по эксплуатации

Страница: 28 / 86

3. LCD menu
14
Page 6
Item Standard setting Item Standard setting
Step Gain 0 *1 Focus Remote OFF
Digital EXT OFF AWB Memory -
Lens File - AWB CH Ach
Zoom Remote OFF
*1: Standard setting can be changed
3.2.2. Diagnostics
Displays simple diagnostics on the LCD screen. This display allows viewing simple
diagnostics even in a system that does not include a PM connected to the BS/CCU output.
The function items and the Camera Select switch numbers are displayed in vertical and
horizontal directions, respectively. The status of all cameras in the same group can be
checked during network operation.
Note :
"-" may be displayed on the screen even when the diagnostics display status is
displayed on the PM. The reason for this is that the connected camera does not
support the necessary command and the MCP cannot obtain the information.
Hence, this is not malfunction.
Page 1
Item Standard setting Item Standard setting
Head Power ON CCU Temp OK
Head Battery OK OPT Level -
Head Memory OK CCU to Head OK
Head Fan OK Head to CCU OK
Head Temp OK Cable Status OK
CCU Battery OK Genlock Other than NG
CCU Memory OK SDTV Aspect 4:3 *1
CCU Fan OK
*1: Standard setting can be changed
The second page shows the Optical Level status for up to 10 camera systems in
bar style display.
The relationship between the status and bar color is shown below.
Status Bar color
OK Green
ATT (Attention) Yellow
WARN (Warning) Red
NG Red
Not supported Bar not displayed
3.2.3. Firmware
The version of firmware (master only in multi-mode) can be checked for the connected
devices, as well as, the MCP-300.
The firmware information is displayed in the following order, from left to right: MCP-
300, BS HUB, camera head, and BS/CCU.
The version of FPGA equipped in this MCP-300 can be checked on the second page.