Ikegami MCP-300, Руководство по эксплуатации

Страница: 55 / 86

5. Camera Select
41
There are two modes for external Camera Select depending on the interface.
࣭ ࣭
Direct mode
Supports switching between up to 10 cameras in the group currently being displayed
and allows you to select one camera per 1 bit of external input signal.
࣭
Combination mode
Supports switching between up to 100 cameras. The camera can be selected by the
combination of the bits of the external input signals.
Reference:
Please refer to "11.2. External Connector Pin Function" for the interface.
5.4. Camera Select Output
Outputs the Camera Select of the MCP-300 to an external device. The external Camera
Select Output is not based on the selection of the actual camera, but based on which
Camera Select switch is selected.
The Camera Select Output is available regardless of the enable/disable status for the
external Camera Select Input.
Please refer to "11.2. External Connector Pin Function" for the interface.
5.5. PAU Control
There is a panel assignment system for OCPs using the optional PAU (PANEL
ASSIGNEMENT UNIT) using Ikegami command. On the MCP-300, press the PAU
switch to load the setting screen.
The PAU is operated from the MCP Menu screen, and displayed on the character screen
of a PM that is connected to the PAU.
Reference:
Please refer to "3.6.5. Menu" and the instruction manual of the PAU for more
details on the operation procedures.