Ikegami MCP-300, Руководство по эксплуатации

Страница: 71 / 86

9. Firmware Update
57
9 Firmware Update
The firmware of the MCP-300 and connected devices can be updated by using an SD
memory card at the MCP.
9.1 MCP-300 Update
ڦ
3 3URFHGXUH
1
Press and hold the [STD] and [PM IND] switches for about 5 seconds.
The update program of the firmware starts.
ڦ
Procedure 2
Insert an SD memory card with the firmware (update file) into the slot.
ڦ
Procedure 3
Use the UP/DOWN select switches to select the update file.
Use the DOWN select switch to confirm the selected update file.
ڦ
Procedure 4
Use the UP/DOWN select switches to specify whether or not to cancel the update.
Use the DOWN select switch to perform the update or cancellation.
The process goes back to Procedure 3 if canceled.
ڦ
Procedure 5
If the update is performed, the data is transferred from the SD memory card to the
internal buffer. During the transfer, the transfer status can be checked on the bar graph
at the bottom of the LCD screen.
The program is automatically rewritten when the data transfer is completed.
Then the CHK SUM is displayed to compare with the data after programming.