Ikegami MCP-300, Руководство по эксплуатации

Страница: 45 / 86

3. LCD menu
31
Memo:
The scene file name and Camera ID cannot be displayed and registered if the
MCP is not connected to a camera that supports the function.
If the Camera ID and scene file name are simultaneously set in multiple control
panels, a malfunction may occur.
„
Basic operation of the registered screen
(1) RE knob under Chara Select
Enter the characters of the type you selected
(2) RE knob under type
Select the type of characters to enter during Chara Select operation
abc : Lower case letters
ABC : Upper case letters
012 : Numerical values
#%& : Symbols
(3) RE knob under Cursor
Select the input character position
(4) INS switch
Insert one character between characters
(5) DEL switch
Delete one character
(6) CLR switch
Delete all characters
(7) Store switch
Register the name in camera memory
„
Scene File Name
Registers the scene file name (up to 31 characters). Since the registered name can
be displayed on the PM, you can check the name of each file.
The name of the scene file that is currently loaded is changed to highlight it is in
use.
Memo:
If the scene file is switched from another control panel while the scene file name
is registered, the registration screen is automatically canceled.
„
Camera ID
Registers the camera head ID (up to 48 characters). Since the registered ID can be
displayed on the PM, you can check which video belongs to which camera.
3.7. MONI OUT
3.7.1. Monitor Out Control
Operates the information monitor function.
„
OFF
Stops the output of characters from the SDI OUT.
„
Optical Level
Displays the optical transmission level from the SDI OUT for up to 10 camera
systems (in the same group).