Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 92 / 136

80
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
E4
Turn the MENU SELECT switch to position the
cursor on “FILE SET”, and press the MENU
SELECT switch.
The cursor moves to the mode selection column.
E5
Turn the MENU SELECT switch to position the
cursor on “MANUAL”, and press the MENU
SELECT switch.
E6
Turn the MENU SELECT switch to position the
cursor on the AUTO SEL NAME display part, and
press the MENU SELECT switch.
The item changes to “MODEL”, and the letters
“CANCEL”
À
ash.
Reference:
If “AUTO SEL NAME” is not set, the AUTO SEL NAME display part does not display the lens model name.
Connect the target lens, perform “AUTO READ”, and then follow the procedures below.
Refer to Steps M1 and M2 for performing “AUTO READ”.
E7
Turn the MENU SELECT switch to switch the
cursor from “CANCEL” to “EDIT”, and press the
MENU SELECT switch.
The under submenu “AUTO SEL NAME EDIT” is
displayed.
E8
Turn the MENU SELECT switch to position the
cursor on the part for displaying the lens name to
be edited, and press the MENU SELECT switch.
The item changes to the edit mode and ( ) at both ends
À
ash.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
Ｘ０．８ ＣＯＮＶ ＣＯＮＴ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E④
Position the cursor on
"FILE SET" and
confirm.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
E⑤
Position the cursor on
"MANUAL" and
confirm.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＣＡＮＣＥＬ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
E⑥
Position the cursor on
the AUTO SEL NAME
display part and
confirm.
The letters "CANCEL"
flash.
▲
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＥＤＩＴ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
(Part for displaying the
lens name to be edited)
Displays the lens model
name to be edited.
(Connected lens name
display part)
Displays the model
name of the lens
currently connected.
E⑦
Switch the cursor to
"EDIT" and press
confirm.
▲
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
E⑧
Position the cursor on
the part for displaying
the lens name to be
edited and confirm.