Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 85 / 136

CAMERA SETTINGS and ADJUSTMENT
5
73
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
---
MENU (3/4)
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
SCAN FORMAT SELECT
|
|
― SCAN MODE
Destination
setting
1080I59, 1080I50,
1080P29SF, 1080P25SF
Selects the camera operation format.
If BS/CCU is connected, the format on the BS/CCU side
and the operation format will be the same.
- -
CPU SYSTEM CONTROL
|
|
― SEMI SELF MODE ON OFF, ON
When disconnecting the remote controller and operating
by the camera alone after adjusting the camera using the
remote controller.
-
AUTO IRIS SET
||
| ― IRIS SET MODE OFF OFF, ON
ON : Enables auto-iris operation setting.
If set to ON, the iris adjustment from the remote
controller is disabled. - -
||
| ― IRIS LEVEL SET 0 -100 to +100
Adjusts the convergence level of auto iris.
Shoot the registration chart with the camera and adjust the
value so that the video level becomes 75%.
- -
||
||
|
― PEAK RATIO SET
-70 -100 to +100
Shoot the gray scale chart with the camera and adjust the
value so that the video level is 100%.
Set the exposure for a bright area in the “+” direction and
for a dark area in the “-” direction. The default value “50”
indicates no exposure compensation.
- -
||
||
|
― IRIS GAIN 50 1 to 100
Sets the auto-iris response sensitivity characteristics.
The auto-iris operation sensitivity is such that “1” is low and “100”
is high.
Hunting tends to occur more often as the value goes up. (Set it
to the default value “50” as long as hunting is not occurring).
- -
||
ʊ
IRIS SPEED 50 1 to 100
Sets the response speed characteristics of the auto-iris.
The auto-iris speed becomes slower for “1” and faster for “100”..
-
||
||
― IRIS LIMIT
F22 F22, F20, F18, F16
If the iris is about to close during auto-iris operation, it
stops the iris operation before it completely closes to prevent
iris hunting.
Sets the iris limit value at that time.
-
|
|
― LENS ADJUST OFF OFF, F2.8, F16
Sets the output of control voltage for fixed iris value during
lens adjustment. To adjust the relationship between the lens
control voltage value and lens iris value, the control voltage
equivalent of F2.8 and F16 can be output to the lens.
- -
AUTO SETUP MODE
||
|
―
AUTO SETUP LEVEL
FULL, QUICK, F.QUICK
AWS, ABS, AWB, ABB
LEVEL
Performs each AUTO SETUP.
Refer to
“Performing the auto setup” for details.
||
| ― FULL AUTO REF INT INT, EXT
Sets the reference for the FULL AUTO SETUP.
INT : Sets to the default factory setting.
EXT : Sets to the user setting.
||
||
― AWB WITH A.IRIS OFF ON, OFF
Selects whether to automatically include the A.IRIS when
the AWB is performed.
This menu is enabled only during the self-operation.
It is always “OFF” during the CCU/BS operation.
-
||
|
―
SMOOTH AWB ON-0.5s
OFF, ON-0.3s,
ON-0.5s, ON-0.7s, ON-
1.0s, ON-1.5s, ON-2.0s
Smoothly switches between Ach/Bch for the AWB.
You can set the transition time for the switching.
-
||
| ― AWB REFERENCE ON ON, OFF
ON : Makes the convergence value of the AWB converged
to the EXT AWB REF.
OFF : Calibrates the Rch/Bch to the Gch.
-
||
||
||
― ABS MODE NORMAL
NORMAL, APS,
P ONLY
Switches the auto-adjust modes of the AUTO BLACK
SHADING (ABS).
NORMAL : Performs the ABS.
APS
: Performs the AUTO PEAK SHADING (APS)
after performing the ABS.
P ONLY : Only performs the APS, but not the ABS.
- -
|
― CHART SEARCH
|
|
― REFERENCE SET ABB ABB, AWB, FULL
Sets the reference value for the AUTO SETUP.
FULL : Creates the reference value for all AUTO SETUP
items.(Except for the convergence value of AWB)
AWB : Creates the convergence value of AWB.
ABB : Creates the reference value of ABB.
* 3
- -
LENS SELECT
||
||
|
―
NUMBER OFF OFF, NO.1 to NO.8
Select the lens file number.
- If the lens code is obtained from the lens, (CODE SEL) is
displayed on the back of the lens number display.
- If AUTO SEL is ON, “AUTO SEL” is displayed on the
back of the lens number display.
-
||
|
― NAME (---------) 12 characters
Set the file name for each lens file.
Attaching the lens model name, etc. will make it easier to
know the correspondence between the lens number and lens.
- -
|
― ( ) (---------)
AUTO SEL name display
section
Displays the lens name obtained from the serial lens. - -