Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 42 / 136

26
HDK-790GX 1403 VER1 (U)
2.2 Displays in the Viewfi nder
① Memory backup battery voltage
The warning message is displayed for 5 seconds when the
voltage of the backup battery in the MPU module has dropped.
② Auto setup function
Executing auto setup function is displayed.
“AWB”
“ABB”
“FULL SETUP”
“LEVEL SETUP” etc.
③ Execution result of auto setup
Execution result of auto setup (AWB and ABB, including) is
displayed.
OK
: Auto setup has been completed.
NG : Auto setup was not completed.
STOP : Auto setup was discontinued.
LEVEL OVER : Input signal level is too high.
LEVEL UNDER : Input signal level is too low.
CHG FILTER
: Optical
¿
lter is not appropriate.
④ Adjustment item of auto setup
The item to which adjustment is being made is displayed
during auto setup.
“FLARE GAMMA GAIN”
“PED”
“IRIS” etc.
⑤ Fan status
The fan status is displayed.
AUTO : Fan is in the AUTO mode.
Displayed when the VF CHAR button is pressed.
SLOW : Fan is in the SLOW mode.
Displayed when the VF CHAR button is pressed.
QUIET : Fan is in the QUIET mode.
Displayed when the VF CHAR button is pressed.
STOP : Fan is in the STOP mode.
Displayed when the VF CHAR button is pressed.
FAN!! : Displayed
À
ashing when the fan has stopped
abnormally.
⑥ AWB color temperature
The color temperature stored in A-ch or B-ch memory
is displayed for 2 seconds when the AWB/ABB switch is
operated. (Selection between A-ch and B-ch is made by the
AWB SELECT switch.) The AWB color temperature is also
displayed when the FILTER switch is operated.
⑦ SKIN DTL ON/OFF
“SK” is displayed when the SKIN DTL function is ON.
⑧ OPT level
Optical signal level of the
¿
ber cable is displayed when the
CCU is connected to the camera. When the optical signal level
is normal, “OPT OK” is displayed for 2 seconds.
⑨ BARS TITLE
The bar title is displayed when the color bar is output.
⑩ Temperature warning
This warning is displayed when the temperature of the inside
of the camera is high.
⑪ ND and CC filter numbers
ND
1 2 3 4 5
100% 25% 6.2% 1.6% CAP
ECC
A B C D E
3200K 4300K 5600K 6300K 8000K
EFF
Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ
CLEAR CROSS SNOW FOG −
⑫ Operational priority for filter control
“*” is displayed when the camera has the operational priority
for the
¿
lter control.
⑬ AWB memory channel
The memory selected by the AWB SELECT switch is
displayed.
A : A-ch memory
B : B-ch memory
O : White balance adjustment is in the preset condition
(3200K).
⑭ Shutter speed/focus indicator/zoom indicator
The shutter speed or focus, zoom position is displayed.
⑮
Digital Extender
Magni
¿
cation is displayed when the digital extender is ON.
⑯ Return video input channel
Input channel for return video is displayed.
RET-1 : Return video 1 is selected.
RET-2 : Return video 2 is selected.
RET-3 : Return video 3 is selected.
RET-4 : Return video 4 is selected.