Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 83 / 136

CAMERA SETTINGS and ADJUSTMENT
5
71
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
MIC GAIN CONTROL
||
| ― MIC1 STEP -40dB
+4dB, 0dB, -10dB, -20dB,
-30dB, -40dB, -50dB,
-60dB
The MIC1 gain is changed step by step. -
||
― MIC1 FINE 0 -100 to 100
Fine adjustment of the MIC1 gain. The gain decreases about
-8 dB with -100, and increases about +8 dB with +100.
-
||
|
― MIC2 STEP -40dB
+4dB, 0dB, -10dB, -20dB,
-30dB, -40dB, -50dB,
-60dB
The MIC2 gain is changed stepwise. -
|
― MIC2 FINE 0 -100 to 100
Fine adjustment of the MIC2 gain. The gain decreases about
-8 dB with -100, and increases about +8 dB with +100.
-
RETURN SELECT MODE
||
|
― RET PRIORITY NOTHING
NOTHING,
RET-3, RET-2, RET-1
If a RET image is not displayed in the viewfinder, sets the
output signal to MON SDI (during RETURN setting).
NOTHING
：
Sets to RET image last displayed in VF.
RET1 ： Sets to RET-1 image.
RET2 ： Sets to RET-2 image.
RET3 ： Sets to RET-3 image.
-
FILTER SERVO MODE
|
― SERVO CONT SERVO SERVO, MANUAL
SERVO ： Sets to automatic control.
MANUAL ： Sets to manual control.
-
SW FUNCTION
||
||
― FUNC SW VF SEL
VF SEL, SIDE MASK,
D.EXT, DOT BY DOT,
NONE
Sets the function of the FUNC switch on the rear side.
VF SEL
: Switches between the signal that is set in the
VF VIDEOSELECT menu and the color signal.
SIDE MASK : Turns ON/OFF the SIDE MASK display.
D.EXT
: Turns ON/OFF the digital extender.
DOT BY DOT : Turns ON/OFF the DOT BY DOT function on
the VF with DOT BY DOT display function.
-
INFORMATION
||
― MPU MODULE SW --- MPU substrate DIP SW Displays the DIP switch settings of the MPU module. - -
|
― WORKING TIME ---
****.*H (information
display) Displays the total accumulated operation time of the camera
up to the present.
- -
|
||
―
SUB TIME ---
****.*H(information
display), RESET
Displays the camera's calculated operation time.
Differs from WORKING TIME because it can be reset by
the user.
- -
||
―
VERSION ---
STR****V**.**.**
(information display)
Number to control the structure of the camera software and
FPGA.
(Regarding the SDI-TRX, because it is on the FA side, it is
not included in this control number).
- -
|
― MPU ROM --- (information display) Displays the camera software version. - -
|
― D.PROC(PRE) ---
(information display) Displays the FPGA version. - -
|
― D.PROC(POST)
--- |
― OPT-PULSE ---
|
― DRIVE&PULSE ---
|
― MPU
---
|
― SDI-TRX ---
*1 : It is possible to determine when loading MENU DATA from the SD CARD whether to read the entire MENU or to read only
items related to VF.
The setting of an item having a checkmark is read.
*2 : If the color VF is recognized automatically, the display switches to R/G/B.