Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 9 / 136

v
HDK-790GX 1403 VER1 (U)
SAFETY PRECAUTIONS
---
Handling Precautions
Regarding the Product
Do not disassemble or modify the product which is not described in this manual. Doing so may
cause
¿
re, electric shock, or injury.
Regarding the Power
When you disconnect the cable, be sure to hold the plug and pull. Failure to do so may cause a
¿
re
or electric shock due to a damaged cable.
To inspect or operate on the inside of the equipment, turn off the power and wait for one or two
minutes before starting work. High voltage is present in some modules and connectors of this
product.
When you want to intercept a power supply surely, I pull a
¿
ber cable of the camera side, or, please
pull an AC plug of the CCU side.
Regarding the Product
Do not lift or hold the camera by the projection parts.
If you lift or hold the camera by the view
¿
nder or the lens, you are prone to dropping it. Moreover,
the connection parts between the camera and the view
¿
nder, or the camera and the lens may be
exposed to unnecessary pressure, which may cause equipment damage.
Always install the accessories or connect the cables after placing the camera on a
¿
xed position.
When installing such accessories as lens or microphone,
¿
x the camera on a stable place (e.g. on a
table, a tripod, etc.).
Avoid use or storage in the following conditions:
- Extremely high/low temperature
- In direct sunlight for a long time, or near a heater
- High humidity or dusty
- Exposed to water or other liquid
- Strong vibration or shock
- Strong magnetic
¿
eld or radio waves
- lightning
- In rain without the rain cover