Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 53 / 136

IN
ST
A
L
L
A
TI
O
N
a
n
d C
O
N
N
E
CTI
O
N
3
3.2 Camera and Peripheral Installation and Connection
41
HDK-790GX 1403 VER1 (U)
Connecting the Headset
This product can connect an intercom to the two lines (INCOM-1 and INCOM-2). Select the line according to the use (for engineer
or for producer, etc). This section explains the use case for INCOM-1.
1
Connect a headset connector to the INCOM-1
connector.
2
Turn on the INCOM-1 switch.
Caution:
Do not set the volume of intercom receiver to near
maximum level from the beginning. Using the
intercom with loud volume may cause a ruptured or
damaged eardrum.
Reference:
Adjust the volume when the sound from the intercom
receiver is dif
¿
cult to hear or too loud. See “5. Camera
settings and adjustments [Audio volume adjustment
of headsets]”
for the audio volume adjustment of
intercom.
ＳＴＢＹ
ＯＮ
INCOM-1 INCOM-2
CAMERA
CALL
RET-1 RET-2
1
2 3
4 1
2 3
4
PGM-1 PGM-2 PGM-1 PGM-2
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
RET-3
1
2 3
4
EXT
FOCUS
ASSIST FUNC
CAUTION : Ensure that the volume
is initially set at a
minimum level.
② Turn ON
INCOM connector
①
Plug the
headset
connector
Camera rear view