Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 89 / 136

CAMERA SETTINGS and ADJUSTMENT
5
77
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
3
On MENU (3/4), turn the MENU SELECT switch to
position the cursor on “LENS SELECT,” and press
the MENU SELECT switch.
The submenu is displayed.
4
Set “NUMBER", “NAME” and “EXTENDER".
Refer to the explanation of corresponding item for how
to set each data.
NO.1 is selected here as an example.
Caution:
If a new
¿
le is created with the same
¿
le number as an existing
¿
le, the data will be overwritten and the old data will be lost.
5
Turn the MENU SELECT switch to position the
cursor on “FILE SET,” and press the MENU
SELECT switch.
The cursor moves to the mode selection column.
6
Turn the MENU SELECT switch to select the set
value, and press the MENU SELECT switch.
The value is con
¿
rmed, and either of the following
messages is displayed at the bottom of the screen:
- LENS No. x
: Displayed when “MANUAL”
is selected.
- PUSH SET -> START : Displayed and
À
ashes when
“AUTO” is selected.
Go to Step 7 when “AUTO” is selected.
When “MANUAL” is selected, go to Step M1 to obtain
the model name of the lens after lens
¿
le items such as
GAIN/FLARE/GAMMA are adjusted by MCP, etc.
7
Press the MENU SELECT switch.
The lens
¿
le is created.
8
Set the S11-4 DIP switch of the MPU module back to “OFF”.
Note:
- When the camera is powered OFF, the FILE SET settings are turned OFF.
- Before creating lens
¿
les, prepare all the lenses to use. Then, create the
¿
les under the same condition at a time. If the conditions are
changed, the setting cannot be accurate. Lens
¿
les memorize a difference in level between lenses. If the lighting or chart is changed,
it cannot tell whether it is the lighting error, chart error, or lens error.
ＳＣＡＮ ＦＯＲＭＡＴ ＳＥＬＥＣＴ
ＣＰＵ ＳＹＳＴＥＭ ＣＯＮＴＲＯＬ
ＡＵＴＯ ＩＲＩＳ ＳＥＴ
ＡＷＢ／ＡＢＢ ＭＯＤＥ
ＬＥＮＳ ＳＥＬＥＣＴ
ＬＥＶＥＬ ＡＤＪＵＳＴ
ＰＲＯＣＥＳＳ ＭＯＤＥ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＭＥＮＵ ＭＯＤＥ
＊＊＊ ＭＥＮＵ （３／４） ＊＊＊
▲
▲
▲
③
Position the flashing
cursor on "LENS
SELECT" and confirm.
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＮＯ．１
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
Ｘ０．８ ＣＯＮＶ ＣＯＮＴ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
▲
⑤
Position the cursor on
"FILE SET" and
confirm.
⑥
Select the set value
and confirm.
⑦
Either message is
displayed or flashes.