Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 86 / 136

74
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
||
― EXTENDER OFF OFF, ON-1, ON-2
Displays the lens extender state,and can be switching the
lens extender.
- -
||
― AUTO SEL OFF OFF, ON
The lens file number is switched automatically according to
the model name obtained from the lens.
-
||
― FILE SET OFF OFF, MANUAL, AUTO
Refer to “5.2 Settings from the Menu [FILE SET]” for
usage method.
- -
||
||
||
||
||
|
― LENS TYPE
OFF
OFF, C.PORTABLE,
C.STUDIO, C.FIELD,
F.PORTABLE, F.STUDIO,
F.FIELD
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens
used in the camera.
OFF
： Game tracking DTL is OFF.
C.PORTABLE ： Canon portable lens
C.STUDIO
：
Canon studio lens
C.FIELD ： Canon field lens
F.PORTABLE ： Fujinon portable lens
F.STUDIO ： Fujinon studio lens
F.FIELD ： Fujinon field lens
Set by lens file (NO.1 to 8).
-
||
||
|
― AUTO x0.8 CONV OFF OFF, ON
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output
aspect ratio of the down converter to carry out automatic
switching.
-
|
― LENS SERIAL I/F ON ON, OFF Set whether to respond to the serial interface of the lens or not. -
LEVEL ADJUST
||
| ― MASTER GAMMA 0.0 -100 to +100
Sets the master gamma value.
The gamma value decreases in the direction of “-100” and
increases in the direction of “+100”.
- -
||
|
― MASTER PED 0.0 -100 to +100
Sets the master pedestal value.
The pedestal value decreases in the direction of “-100” and
increases in the direction of “+100”.
- -
||
|
―
MASTER FLARE 0.0 -100 to +100
Sets the master flare value.
The flare value decreases in the direction of “-100” and
increases in the direction of “+100”.
- -
||
| ― DTL GAIN 0.0 -100 to +100
Sets the detail amount.
The detail amount decreases in the direction of “-100” and
increases in the direction of “+100”.
- -
|
― ADJ CLR READY
READY,
PUSH SET
ĺ
CLR,
CANCEL
Returns the settings changed with LEVEL ADJUST to the
state prior to change as a group.
- -
PROCESS MODE
||
||
|
― GAMMA TYPE NORMAL
NORMAL,
CUSTOM1 to 5
Selects the type of gamma curve.
NORMAL
: Normal gamma curve
CUSTOM1-5 : Custom gamma curve
(Refer to “MENU(3/4)>CUSTOM GAMMA
DATA” for editing the custom gamma data.)
- -
||
||
― SMOOTH STEP GAIN ON-0.5s
OFF,
ON-0.3s, ON-0.5s, ON-
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
Changes the STEP GAIN step by step.
Possible to choose the time until convergence.
-
||
||
― SMOOTH STEP ECC ON-0.5s
OFF,
ON-0.3s, ON-0.5s, ON-
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
Changes the STEP ECC step by step.
Possible to choose the time until convergence.
-
||
― MATRIX OFF OFF, 1, 2, 3
There are independent settings for three channels of the
matrix, which can be switched.
- -
|
―
HI-LIGHT DTL ON OFF, ON Possible to increase the DTL level of the highlight part. - -
|| ||
― GAIN 0.0 0 to 100
*4
Sets the level value to be emphasized.
Level increases in the direction of +100.
- -
||
|
|
|
― LIMIT
0.0 -100 to +100 *
4
Sets the upper limit for the emphasized DTD level.
The “-100” direction lowers the limit. The “+100” direction
raises the limit and lowers the DTL level.
- -
||
||
||
―
SMOOTH KNEE TYPE-1
OFF,
TYPE1, TYPE2, TYPE3
SMOOTH KNEE is a function to adjust the compression
level of the brightness signal with KNEE. It can be selected
from the following three setting types.
TYPE1 : The compression rate of brightness is low.
TYPE2 : The compression rate of brightness is medium.
TYPE3 : The compression rate of brightness is high.
- -
||
| ― DTL V FILTER OFF ON, OFF
If the V filter of the DTL is ON, the resolution feeling in
direction V diminishes, making it possible to obtain an
image with less noise.
-
|
― LINE MIX OFF ON, OFF
Can be turned on only when operating in 1080P29SF and
1080P25SF formats.
Can reduce resolution in the vertical direction.
-