Ikegami HDK-790GX, Руководство по эксплуатации

Страница: 82 / 136

70
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
Menu Confi guration and content
The following lists the camera menu con
¿
guration.
---
MENU (Simple Menu)
The simple menu is the same as MENU (1/4) described below. Refer to items in MENU (1/4) for details of each menu.
---
MENU (1/4)
*1
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
VF DISPLAY
|
― VF ASPECT 16:9 16:9, 4:3 Sets the VF aspect ratio.
||
― SIDE MASK OFF
ON-14:9, ON-13:9,
ON-4:3, OFF
Sets the side mask.
|
― CONTRAST 50 0 to 100 Adjusts the side mask contrast level.
|
― BRIGHT 60 0 to 100 Adjusts the side mask brightness level.
||
― SAFETY AREA ACTION ACTION, TITLE
ACTION ： Area marker of 93% of the screen height and width.
TITLE ： Area marker of 89% of the screen height and width.
|
― SAFETY MARKER ON-16:9 ON-4:3, ON-16:9, OFF Sets the safety marker.
||
― CENTER MARKER ON
OFF
TYPE1, TYPE2, TYPE3
Sets the center marker.
||
― FRAME MARKER OFF
ON-16:9, ON-14:9,
ON-13:9, ON-4:3, OFF
Sets the frame marker.
|
― FOCUS INDICATE ON OFF, ON Only active when using the serial lens.
|
―
ZOOM INDICATE ON OFF, ON Only active when using the serial lens.
VF DTL
Adjusts the overlap amount of the VF image focusing edge
signal (VF DTL).
|
|
― BOOST FREQ 10MHz
10MHz, 15MHz,
18MHz, 18MHzWIDE
Selects the frequency to be boosted.
|
― NOISE SUP 5 0 to 10 Sets the removal level of the noise signal.
VF MODE
||
― COLOR VF MODE
AUTO AUTO
AUTO : Automatically recognizes the color VF to convert
the VF VIDEO signal to R/G/B output.
||
― VF VIDEO SELECT
Y
*2
(R/G/B)
Y, R, G, B, R+G+B,
(R/G/B)
Sets the VF image output.
R/G/B can be set in case the color VF is mounted or when
the COLOR VF MODE is ON.
|
― FRONT TALLY ENABLE ENABLE, DISABLE Sets active/inactive for VF FRONT TALLY.
FOCUS ASSIST
||
| ― ASSIST AREA
TRIGGER
ON
TRIGGER ON,
ALWAYS ON, OFF
Sets the ASSIST AREA display.
Select TRIGGER ON if you wish to display with the trigger
of lens operation, etc.
- -
||
― TRIGGER FOCUS FOCUS, FOCUS/ZOOM
Trigger to display ASSIST AREA.
This setting is used when TRIGGER ON is selected.
- -
||
― VF DOT BY DOT UNLINK UNLINK, LINK
Sets whether a control signal is sent to a VF having a DOT
BY DOT display function.
- -
||
― FOR RET ON ON, OFF
Sets whether to display the ASSIST AREA or not when
switching to the RET signal.
- -
||
― ASSIST DATA NO.1 N0.1 to N0.4
Selects the ASSIST DATA compiled in the ASSIST DATA
SETTING menu.
- -
|
― ASSIST DATA SETTING
||
― AREA DISP TIME 1.0S
0.0S to 5.0S
(units of 0.5 sec)
Sets the time from trigger detection until the focus assist
area is erased.
||
― AREA SIZE 15 1 to 100
Sets the focus assist area range.
If set to “100", it is the entire screen domain.
|
― AREA LEVEL 60% 100% to 25% Sets the image level of the ASSIST AREA.
||
― AREA COLOR MONO MONO, COLOR, NEGA
Sets whether the ASSIST AREA image should be color,
monochrome or negative.
|
― AREA MARKER OFF ON, OFF Sets whether the assist area frame marker is displayed nor not.
|
― EDGE BOOST LEVEL 55 1 to 100 Sets the boost level of the edge signal. |
||
― EDGE COLOR MONO
MONO, CYAN,
MAGENTA, YELLOW,
GREEN, RED, BLUE
Sets the color of the edge signal.
|
― STORE DATA --- N0.1 to N0.4
The contents set in the ASSIST DATA SETTING menu are
stored as ASSIST DATA. Select the numbers you wish to
store from No. 1 to No. 4 and write over the present data to
store them.
- -