IFM Ecomat 300 AC1307, Основное руководство устройства

Страница: 15 / 219

2BSystem requirements
27BInformation concerning the device
3-1
3 System requirements
3.1 Information concerning the device
This manual presents the AS-i controllere family from
ifm electronic gmbh
•
with AS-i version 2.1 masters
•
with a firmware from version RTS 2.2
• with the target from 15
3.2 Information concerning the software
The controllere operates with CoDeSys
®
as from version 2.3.
In an additional manual "User Manual for PLC Programming with CoDeSys
®
2.3"
you will obtain more detailed information about the use of the programming system
"CoDeSys for Automation Alliance". This manual is available as a free download on
the
ifm
website:
→
3.3 Required accessories
To run the system you need the following accessories in addition to a controllere
(not included in the scope of supply):
•
a power supply for 24 V supply (e.g. order no. DN2011) and
• one AS-i power supply per AS-i master (e.g. order no. AC1216)
•
as well as AS-i slaves.
Description of the corresponding fieldbus or Ethernet programming interface
→ separate instructions in addition to this device manual.
If you want to use the PC for configuration and programming you also need:
•
the software "CoDeSys for Automation Alliance" version 2.3 or higher
• a programming cable (e.g. article no. E70320)
• as well as a PC with serial interface.