The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the products or the
execution of the project to which it refers, and from communicating it to third parties without Automatic Systems’ prior written agreement. Document subject to change without notice.
BL3x-MT-EN-08
page
4/59
1. SAFETY
WARNINGS
We thank you for having chosen the electrical rising barrier type BL32/BL33 designed and manufactured
by Automatic Systems. We are confident that your purchase will fully meet your requirements. However,
in order to obtain maximum satisfaction from this equipment for a maximum period of time, we strongly
advise you to read this manual carefully before installing the equipment.
Although this manual has been prepared with great care, some information may seem erroneous or
unclear to you. In this case, please do not hesitate to contact us with your remarks or questions.
WARNING:
Y
OUR RISING BARRIER TYPE
BL32/BL33
COMPRISES A MECHANISM AND VARIOUS ELECTRICAL
COMPONENTS
.
A
NY NEGLIGENCE DURING AN INTERVENTION IN THE MACHINE MAY SERIOUSLY
ENDANGER YOUR SAFETY
.
A
S SOON AS YOU OPEN THE HOUSING
,
SWITCH OFF THE POWER BY
SWITCHING OFF THE MAIN CIRCUIT BREAKER
(
4:1
)
LOCATED BEHIND THE SIDE DOOR
.
B
E CAREFUL IN
HANDLING ANY INTERNAL ELEMENT WHICH MIGHT BE UNDER POWER OR COULD BE SET IN MOTION
.
T
HE
HOOD SHOULD BE REMOVED ONLY IF YOU NEED TO REPLACE THE DRIVING SHAFT OR A SPRING
,
ADJUST
THE BELT
(
S
)
OR PROCEED WITH THE MAINTENANCE
.
WARNING
: Never raise the arm brackets by means of the crank, without the boom arm fixed for
counterbalancing the spring: the arm brakets would swing violently, with serious injury
risks for the operators.
IMPORTANT INFORMATION CONCERNING HEALTH & SAFETY PROCEDURES
The introduction of a pedestrian or vehicle barrier product as manufactured by
Automatic Systems
places a duty
of responsibility for the safety and well-being of any user(s) or person(s) in close proximity to such equipment.
You are required therefore to observe and put in place appropriate safety measures, as deemed necessary.
♦
Pedestrian flow must be prohibited anywhere within a vehicle barrier passage-way, unless the movement of
the barrier system is clearly indicated, e.g. audible and/or visual signals, floor marking, notices, etc.
♦
Access keys to any of the internal mechanisms can only be issued to authorised and qualified personnel,
aware of the relevant electrical and mechanical safety codes and regulations in force. All equipment housing
must be kept locked.
You have a legal obligation and responsibility to enforce good safety practices at all times. See also note below.
Note:
In the countries of the European Union, the requirement 1.3.7.2 of the EC Machines Directive
prescribes that the pictogram for "Dangerous area* -- no entry for pedestrians" be affixed on both
sides of the equipment (* within 1 meter of the barrier arm in its closed position).
black
white
red