10
Tsi620 Evaluation Board User Manual
60D7000_MA001_03
Intergrated Device Technology
www.idt.com
1.2.2.3
sRIO Fabric
•
Tsi620 functions as the central hub to provide high-bandwidth data traffic of backplane, FPGA,
DSP, and PrPMC
•
Tsi620 sRIO switch with dedicated PCI Interface and RIO XGMII port
•
4x sRIO link to AMC-sRIO backplane with 10-Gb bandwidth
•
4x sRIO link to AMC vertical slot for AMC to AMC connection in stand-alone mode
•
32-bit, 66-MHz PCI interface to PrPMC module
•
XGMII-like 4x RIO port to FPGA with 10-Gb bandwidth
•
Dual 1x sRIO links to DSP with 5-Gb bandwidth
1.2.2.4
Ethernet Network Interface
•
GigE RJ45 port to DSP SGMII EMAC for external network connection
•
PrPMC module can bridge between the external Ethernet network and Tsi620’s sRIO switch
•
Supports AMC backplane port 0 GigE (1000Base-BX) to RJ45 to facilitate system management
networking connection
•
10M/100M Base-T RJ45 to Stratix3 FPGA
1.2.2.5
Board Form Factor
•
Single width, full height, and custom length AMC card (73.8W x 350L x 29H mm)
•
Supports a standard PrPMC module on the extension segment
•
Available vertical AMC connector for another AMC card in stand-alone operation mode
•
Front panel connectors: 2 x SFP cages, 2 x RJ45 (GigE), and 1 x MINI-USB
•
Additional connectors: RJ45 (100BaseT) and 12V DC input barrel plug
•
Supports DSP emulation port and FPGA JTAG port on board
•
AMC physical Hot Swap function with the manual toggle switch
1.2.2.6
Design for Testing Features
•
4x sRIO to AMC vertical connector for stand-alone operation
•
USB based JTAG port on Tsi620 for the internal register access
•
Tsi620 on-die scope support with standard JTAG port (Wiggler)
•
60-pin DSP emulator connector for DSP development
•
Single JTAG header for both Altera FPGA and Actel FPGA programming and debugging
•
GPIO signal network of Tsi620, FPGA, and DSP
•
Two LED-display attached to FPGA
•
LEDs, DIP switches, and test points, for testing support