Part 2 - Configuration
98
IPv4_DHCP
Select
DHCP
and then
Save
to retrieve IP address and
other network settings automatically from the DHCP
server. Once the network settings have been retrieved,
the NVR’s current IP address is displayed in the IP
Address field.
•
It may not be possible to retrieve the IP address if
there is no DHCP server. If this is the case, contact
your network administrator.
•
With DHCP, the NVR's IP address might change with
each startup.
•
When registering NVR with the IDIS mobile
application, you can easily enter the IP address
using the QR code.
There is a limit to the number of users allowed to
connect remotely at the same time. Contact the
service center for more information.
IPv6_None
Select
None
and then
save
to disaple IPv6 mode.
IPv6_Manual
•
Manual
lets you configure related settings
manually. Configure
IP Address
,
Prefix Length,
Gateway
, and
DNS Server
settings manually using
the remote control's arrow buttons or the virtual
keyboard.
•
When registering NVR with the IDIS mobile
application, you can easily enter the IP address
using the QR code.
IPv6_Link-local
Configure the Link-local address. It is used by nodes
when communicating with neighboring nodes on the
same link.
