Part 2 - Configuration
102
Notification Setup
Schedule
Select the + icon at the lower left corner of the screen to
add a notification schedule.
●
Day
: Add different schedules for different days of the
week.
●
Range
: Change the event notification time frame.
●
Notify
: Select which notifications to generate when
an event occurs. Select
,
LAN 1 through 5
,
Push
,
HTTP, FTP
, and/or
Summary
.
•
In order to use the
Notification
(Callback) feature,
the NVR must be registered on the remote
program.
•
Select the icon to delete the existing schedule.
●
Summary Email Interval
: Transmit event summary
emails to a remote destination at specified intervals.
Callback
Configure Callback settings.
Enter the IP address of the receiving server and set
Retry
to between 1 and 10 in case of connection failure.
Select the Setup... button at the lower right corner of the
screen to configure Callback Retry Policy.
●
Short-Term Retry Policy
: Configure short-term policy
to retry a callback event.
–
Retry:
Number of times to retry a callback event.
–
Dwell:
Wait time (in seconds) between retry
attempts
●
Long-Term Retry Policy
–
Use:
Configure long-term policy to retry a callback
event.
–
Retry:
Number of times to retry a callback event.
–
Dwell:
Wait time (in minutes) between retry
attempts
–
Check Interval:
Interval time (in minutes) to check
failover.
In a general wired network communication
environment, not a wireless (mobile) /
satellite communication environment where
communications failures are frequent, long-term
retry policies (LTRPs) are not required, except for
particular cases.