Part 2 - Configuration
53
●
IRIS
: Depending on the camera type, the user can
select DC-IRIS or P-IRIS.
–
DC IRIS
–
OFF
: Select this if a manual IRIS lens is mounted
on the camera.
–
DC-IRIS (Auto) :
Select THIS IF A DC-type auto
IRIS lens is mounted.
–
P-IRIS
–
P-IRIS (Auto)
: The system will assess the lighting
conditions and adjust the openness of IRIS
automatically.
–
P-IRIS (Fix) :
Use the slider to select the desired
openness of IRIS. Select the most suitable value
for the lighting conditions in the area where the
camera is located.
●
Shutter Speed Control
: Adjust Shutter Speed. This
option is available only when
Anti-Flicker
and
Slow
Shutter
are both set to
Off
.
–
Auto
: The system will assess the lighting conditions
and adjust the shutter speed automatically.
–
Manual
: Use the slider to select the desired
shutter speed. Select the most suitable minimum
and maximum shutter speeds for the lighting
conditions in the area where the camera is located.
(1/30 to 1/8000)
Select
Apply
after setting up a camera to see
images from the concerned camera on the left
side of the screen. Selecting
Apply
or
OK
displays
a popup screen that indicates whether the
camera has been set up successfully or not.
Day & Night Options
●
Black & White Mode
: Display the images in grayscale
for greater clarity in low-lighting conditions.
–
On/Off
: Enable/disable
Black & White Mode
.
–
Auto
: Allow the system to enable/disable
Black &
White Mode
automatically.
–
Schedule
: Set up the
Black & White Mode
schedule.
Black & White Mode
is disabled for all
days and times that are designated as
Daytime
in
the schedule and is enabled at all other times.
●
IR Mode
:
IR Mode
blocks out the infrared spectrum.
You can ensure clear images at all times by blocking
out the infrared spectrum in high-lighting conditions
and allowing the infrared spectrum to pass through in
low-lighting conditions.
–
Daytime Mode/Nighttime Mode
: Enable/disable
IR Mode
.
–
Auto
: Allow the system to enable/disable
IR Mode
automatically.
–
Schedule
: Set up the
IR Mode
schedule.
IR
Mode
is disabled for all days and times that are
designated as
Daytime
in the schedule and is
enabled at all other times.
Some camera models may not support the
Schedule
function.
●
Switching Mode :
Changes the switching mode of
daytime and nighttime. In normal mode, daytime/
nighttime is switched through the amount of light
received by the ambient light sensor. In advanced
mode, it is switched through the amount of light and
the analysis of the camera video.
●
Switching Level :
Controls the changing time
of daytime / nighttime mode, depending on the
Switching Level. The higher the value is, day /
nighttime mode is changed under high-lighting
conditions. Also the lower the value is, day / nighttime
mode is changed under low-lighting conditions.
