Part 2 - Configuration
56
* MAT function(Motion Adaptive Transmission)
reduces bandwidth overload and saves storage
capacity by reducing the frame rate of the video
during periods of inactivity. The user can select the
period of sustained inactivity which triggers this
function by adjusting Inactivity Period.
●
Sensitivity
: Set the motion detection sensitivity.
Higher values will result in more sensitive motion
detection.
●
Inactivity Period
: Set the Inactivity Period. If motion
is not detected for the duration of time specified,
video is transmitted and recorded using the frame
rate designated below until movement is detected
again.
●
Mode
: Set the camera resolution to 16:9, 4:3.
Depending on the mode you have set, the resolution
that can be set in the stream section changes.
Audio
Configure audio recording settings for all cameras
simultaneously.
●
Audio Codec
: Select an audio codec. (G.711 u-Law,
G.711 a-Law, ADPCM 16KHz or G.726)
●
Associated Audio In
: Associates the selected audio
channel with the camera. It is supported by video
encoders only.
●
Audio In
: Select an audio input source (microphone
or line-in) and then adjust the volume. Auto detection
function detects the audio input and automatically
selects the audio-in device. Noise Filter reduces the
environmental noise and enhances the voice. If you
turn on the noise filter, the sound may be distorted
somewhat. We recommend that you do not use this
function in a loud place because it may degrade
performance.
●
Audio Out
: Adjust the volume.
Cameras do not feature built-in audio amplifier units
and therefore require the user to purchase a speaker
system with a built-in amplifier separately.
