manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, Руководство пользователя, Страница: 618 / 1665

Поделиться
Скачать
IDEC MICRO/I HG4G-CJT22 F-B Series Скачать руководство пользователя страница 618

1 Numerical Input

10-12

WindO/I-NV4 User’s Manual

■

Display Numerical Value with “*” 

*1

Select this check box to display the entered value as * (asterisks).
Nothing is displayed if the value of device address is 0 when this check box is selected and the 

Suppress Zeros

 

check box is selected on the 

General

 tab. When this check box is selected in entry mode, nothing is displayed until a 

value is entered from the key buttons or keypad. If 

ENT

 is pressed with nothing displayed, 0 is written to the 

destination device address.

■

With Unit

*1

Select this check box to display units or other characters at the end of a number. Displayed characters must be 
registered in Text Manager. The displayed text color will be as set for 

Text Color

 under the 

Format

 tab.

■

Windows Font

Configures the font to use as the Windows Font.
Select 

Windows

 for 

Font

 to display the current settings. To change the settings, click 

Change

 to display the 

Font

 

dialog box. For details, refer to Chapter 2 “Windows Font” on page 2-13.

■

Change Display Colors

To switch the text and plate colors, select this check box and select the method to the display colors from the 
following.

*1 Advanced mode only

Text ID: Specifies the Text Manager ID No. (1 to 32000).

Click 

 to display Text Manager.

Text:

Displays the characters of the specified Text ID.

• The maximum number that can be displayed with this function is 4 characters. The fifth and subsequent 

characters of a character string are not displayed. However, if Windows Font is set for the specified Text 
ID characters all the characters are displayed.

• If a carriage return (CR) is included the characters after the CR are not displayed.

Trigger Device Address: Specifies the bit device or the bit number of the word device to use as the trigger to switch 

the text and plate colors.

Click 

 to display the Tag Editor. For the device address configuration procedure, refer to 

Chapter 2 “5.1 Device Address Settings” on page 2-68.
When the value of device address is 0, the color specified in 

Text Color

 or in

 Plate Color

 

on the 

View

 tab will be displayed.

When the value of device address is 1, the color displayed and specified in 

Text Color

 or 

Plate Color

 under the 

Change Display Colors

.

Text Color:

Selects the color (color: 256 colors, monochrome: 16 shades) of the text when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.

Plate Color:

Selects the plate color (color: 256 colors, monochrome: 16 shades) when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.
This option can only be configured when 

Standard

 is selected for 

Image Type

 on the 

View

 

tab.

MICRO/I

1234

1234

0

1

Trigger Device Address

Trigger Device Address

External device

Text Color

Plate Color

 on the 

View

 tab

Text Color

 under 

Change Display Colors

Plate Color

 under 

Change Display Colors

Содержание MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов