IDEC MICRO/I HG4G-CJT22 F-B Series Скачать руководство пользователя страница 528 | Manualshive

Страница: 528 / 1665

IDEC MICRO/I HG4G-CJT22 F-B Series Скачать руководство пользователя страница 528

6 Multi-Button

8-126

WindO/I-NV4 User’s Manual

■

Recording Channel

The recording of images starts.
Selects

Channel 1

or

Channel 2

to record a video only (no audio) out of the signals input from the device. This

setting is enabled only if

Rec.

was selected using the Key Browser.

■

Recording Target

The recording of images and sound starts.
Select the target to record out of the signals input from the device. This setting is enabled only if

Rec.

was selected

using the Key Browser.

*2 HG5G/4G/3G-V only
*3 This is applicable for HG4G/3G with a video interface only.

• Movie files cannot be recorded during playback.
• While data is being recorded after an event occurs with the event recording function and while data is

being saved to the external memory device, recording cannot be executed with a Key Button, Multi-
Button, or Multi-Command configured with the recording function. Also, during these situations, the
value of HMI Special Data Register LSD155-0 changes to 1. For details, refer to Chapter 33 “HMI Special
Data Register (LSD)” on page 33-7.

Video and Audio:

Records images and sound.

Video only (No Audio):

Records images only.

• Movie files cannot be recorded during playback.
• While data is being recorded after an event occurs with the event recording function and while data is

being saved to the external memory device, recording cannot be executed with a Key Button, Multi-
Button, or Multi-Command configured with the recording function. Also, during these situations, the
value of HMI Special Data Register LSD155-0 changes to 1. For details, refer to Chapter 33 “HMI Special
Data Register (LSD)” on page 33-7.

«
...
526
527
528
529
530
...
»

Содержание MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов