manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, Руководство пользователя, Страница: 1108 / 1665

Поделиться
Скачать
IDEC MICRO/I HG4G-CJT22 F-B Series Скачать руководство пользователя страница 1108

3 Text Manager

19-12

WindO/I-NV4 User’s Manual

■

 (Find)

Displays the Find dialog box.
The text entered in 

Find what

 is searched for in (Text) in the (Text Messages List).

■

 (Replace)

Displays the Replace dialog box.
The text entered in 

Find what

 is searched for in (Text) in the (Text Messages List) and that text is replaced with the 

text entered in 

Replace with

.

■

 (Destination)

Specifies the text ID to move the focus (1 to 32,000).

■

Go to

Moves the focus to the text ID specified in (Destination).

■

 (Import)

Imports text in a text list saved as a CSV file or as a text file.
Click this button to display the Open dialog box. For details, refer to “Importing Text from a Text List” on page 19-7.

■

 (Export)

Saves the text for the text group being edited as a CSV file or as a text file. This file is called a text list. The types of 
files that can be saved are as follows.

• CSV file (comma delimited) (*.csv)
• CSV file (semicolon delimited) (*.csv)
• Unicode text file (tab delimited) (*.txt)

Click this button to display the Save As dialog box. For details, refer to “Saving Registered Text as a CSV File” on page 
19-6.

The saved text list can be imported with 

 (Import).

When 

Unicode text file (tab delimited) (*.txt)

 is selected, the file can handle multiple languages by 

using a commercially available text editor or spreadsheet software that supports Unicode.

Содержание MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов