Page 20 / 86
00U07310090-A
Ecomod Heat Pump Control -
Installation and Servicing
4.3. Fault display
When a non-blocking fault occurs, a small bell
appears in the upper left corner of the display. To
display the fault, press the information key .
This type of fault does not cause operation to be
blocked, requiring manual intervention..
Once the source of the fault has been removed,
the bell disappears automatically.
When a fault causes the heat pump to trip, the
fault code and its label are permanently displayed
on the screen. Similarly, a small bell appears at
the top LH corner of the display.
To reset the heat pump controller, remove the
source of the fault then press the reset button.
