46
C L E A N I N G A N D M A I N T E N A N C E
E N
To remove the collet:
▷
Apply the black spindle wrench [5] over the col-
let.
Fig. 15
▷
Insert a milling tool into the open collet.
▷
Using the spindle wrench, unscrew the collet out
of the spindle.
Fig. 16
▷
Clean the collet holder using the felt cone [3].
The collet holder must be free of shavings/chips
and debris.
Fig. 17
▷
Clean the inside of the collet with the fine collet
brush [2].
Fig. 18
▷
Apply a light coat of the collet grease ([1] in
Fig. 14 on page 45) from the service set to the
outer cone of the collet.
This improves the sliding properties and
increases the clamping force of the collet.
5
2.
1.
NOTE:
Only use the provided collet grease for lubrica-
tion of the collet cone. Do not use other types of
grease.
2.
1.
3
2
