39
A P P L I C A T I O N A N D O P E R A T I O N
E N
▷
Insert the standard tools into the blank holder.
Position the tool shank facing toward the out-
side.
▪
Cutter 1.8 is in the spindle.
▪
Set cutter 1.4 to position
“
2 A
”
.
▪
Set cutter 1.0 to position
“
3 A
”
.
▪
Set cutter 0.4 to position
“
4 A
”
.
▷
Optionally: Insert the sister tools into the blank
holder. Position the tool shank facing toward
the outside.
▪
Set cutter 1.8 to position
“
1 B
”
.
▪
Set cutter 1.4 to position
“
2 B
”
.
▪
Set cutter 1.0 to position
“
3 B
”
.
▪
Set cutter 0.4 to position
“
4 B
”
.
▷
Insert the selected blank into the blank holder.
Fig. 9
Inserting a blank
▷
Tighten the screws with the Allen key provided.
To check the axis system:
▷
With the door shut, select the
Service/Calibra-
tion function at the operational display.
▷
Follow the instructions on the display.
6
Application and Operation
6.1
Function of the buttons
Fig. 10
Buttons
After re-positioning the milling machine, it
is necessary to check the system axes.
2.
1.
WARNING:
Danger from shavings/chips or tool fragments
being thrown from the machine!
▷
Make sure that the door of the milling machine
is always closed during processing!
Key
Door shut
Door open
Operation
button [A]
Starts or stops the
reference run;
starts or stops the
current program;
activates or deac-
tivates the control
position; activates
the change posi-
tion for the blank
holder
Activates or
deactivates
the extrac-
tion system
Service
button [B]
Interrupts the cur-
rent program; acti-
vates the service
position; activates
the tool-changing
position; starts a
cleaning run of the
inspection window
Activates or
deactivates
the sealing
air
Tab. 2
A
B
