ICP DAS USA PMC-523 Series Скачать руководство пользователя

Страница: 19 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual



Provides Timer & Schedule function for device operation control.



Provides alarm message notification function via Email/SMS message/LINE

Notify/Facebook Messenger.



Local Display for On-Site operations (PMD only)



PMD is equipped with local side TFT LCD (with Touch Panel). It provides an

easy way for viewing the power data and setting the system parameters on

sites.



Connection with SCADA/IT/IoT system



Support Modbus TCP/RTU Slave protocol that allows seamless integration

with SCADA software.



PMC-523x/PMC-224x/PMD support the MQTT protocol. It can publish the

power data of the power meter which connect to PMC-523x/PMC-224x/PMD

to the MQTT broker, and receive the message of the Subscribe MQTT Topics

which is published by others MQTT device for the using in the

IF-THEN-ELSE logic rule.



PMC-523x/PMC-224x/PMD support the connection ability with the IoT

Cloud Platform as Microsoft Azure, IBM Bluemix, etc. It work as the power

meter concentrator in the IoT application to connect with power meters,

collect and transfer the power data to the Cloud platform for future data

analysis. PMC-523x/PMC-224x/PMD also can receive the message which is

published from the Cloud platform for the corresponding actions at the field

side.



PMC-523x/PMC-224x/PMD support the connection ability with ICP DAS

IoTstar. It enables the remote management and firmware update on the

PMC-523x/PMC-224x/PMD controller via user-friendly and intuitive Web

page interface, and receive the power data and I/O channel data of the Sensors

and Power meters from the remote PMC-523x/PMC-224x/PMD controllers

and import them into the Database.



Others



Offers access management for logic rule settings and encoded function for the

content to avoid unauthorized access to the system.



PMC-5231M-4GE/4GC, PMC-5231M-3GWA & PMC-2241(with optional

3G/4G modem) supports 4G/3G Wireless data communication. With the

4G/3G SIM card, it can send the data logger files and Email alarm message

back to the control center by 4G/3G Wireless Network.



PMC-5231M-4GE/PMC-5231M-4GC/PMC-5231M-3GWA/PMC-2241

/PMD equips SMS command receiving and alarm message notification

function. It allows to include SMS alarm sending action into logic rules to

Содержание PMC-523 Series




























































































































































































































































































































































Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды

ICP DAS USA PMC-523 Series, Руководство пользователя

Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды